Yard drainage can be a mess if you don’t have a properly functioning system. In this article, we are going to discuss some of the most common yard drainage problems and what you can do to fix them.

  1. Over-saturated soil: One of the most common yard drainage problems is over-saturation of the soil. This can happen if the soil is poorly drained or if there is not enough pipe or gravel in the system. To fix this problem, you will need to add more pipe or gravel to the system, or change the soil type to something that is better drain.
  2. Blockages: Another common yard drainage problem is blockages. These can be due to debris build-up, tree roots, or clogged pipes. To fix this problem, you will need to clean up the area and remove any obstructions. You can also try using a snake to clear blocked pipes.
  3. Waterlogging: If water accumulates in your yard too long, it can cause waterlogging. This can severely damage plants and turf, and make it difficult to walk around. To fix this problem, you will need to drain the water off quickly using a hose or pump. You can also try using a sand berm or rain barrel to help collect runoff water.

Pipes and Culverts

Pipes and culverts are a common issue when it comes to drainage. They can become blocked by leaves, debris, and rainwater, leading to flooding or even sinkholes. To prevent these problems, be sure to check your pipes and culverts regularly and clean them as needed.

Leaks from Faucets


A common drainage problem is leaks from faucets. Many faucets are installed with plastic washers between the faucet body and the brass or copper pipe that carries water to your garden or lawn. Over time, these washers can wear down, allowing water to seep through the joint and into the ground. You can try to fix a leak by tightening the brass or copper fitting, but if the leak is severe, you may need to replace the entire pipe.

Overflowing Drain Pipes

There are a few things you can do to prevent your drains from overflowing.

– First, make sure that the pipe is large enough for the amount of water being discharged.

– Second, make sure that the drain is properly sized and plumbed.

– Finally, use a drainage snake to clear blockages or debris from the pipes.

Roots and Shrubs Clogging the Drainage System

How to fix yard drainage?

  1. Check the condition of your pipes and drainage system. If they’re in poor condition, debris can easily accumulate and block the drains. Replace any cracked or damaged pipes, and clean out any built-up sediment or dirt with a plunger.
  2. Remove any overgrown trees, bushes, or vines from around the drains. These plants can grow rapidly and form dense root systems that can block the flow of water.
  3. Clear away any rubble or other materials from around the drain openings. This can block water from flowing freely down the pipe, leading to flooding.
  4. Use a hose to wash down surrounding areas if there is an obvious build-up of debris. This will help remove any obstructions from the drainage system before they have a chance to block it completely.



If you find yourself struggling with drainage in your yard, there are a few things that you can do to rectify the situation. One of the most common problems is clogged pipes, and fixing this issue can be as simple as using a plunger or snake to dislodge any material that has built up over time. If water continues to flow slowly or not at all from your drains, it might be time to call on a professional. No matter what the problem may be, don’t hesitate to get in touch with one of our friendly professionals who will be more than happy to help.